Hi There folks :)


(Esskie) #21

Righty o, now you mention it I seem to remember 125 being goos for some reason??, hunkmegs etc, just the same as Q3 engine too ?.

Btw, can anyone say why everytime I tried to speak to ‘all’ I kept getting mute-penalty and tickede off 4 language!?. There was someone called Necromancer joined Higgin’s svr & I was trying to ask them but when the message did get displayed it was unreadable with letters replaced by asterixes?


(ayatollah) #22

Sounds like Higgins server is up the left! but I don’t know why people play etpub, etpro kicks ass. You should try out all diff versions of ET to see which you like. The VPL etpro server is full every day, usually after 3 or so but differs, so if you wanna join the craic go to the server below! ET FTW!

EDIT: Oh and add the tapir to your sig! It is teh roxxors! :wink:


(Loffy) #23

Esskie, Welcome to the forum.
Hm, the word “esskie” sounds like something that a character in the moomin books could say. (e.g. “Esskie tesskie! Where did I put the key to my house!”) And I notice your Linux image. Are you from Finland?
I live in Umea, across the water. Terve/Tjenare!
//Loffy, master of deduction and mapping


(ElderNewb) #24

um Loffy, oh master of deduction, he says in his first post he lives near Edinburgh :bump:


(Higgins) #25

Esskie, just pm me some time if you feel like having a game, maybe you might like to join up with my clan? Just let me know :slight_smile:


(ElderNewb) #26

oh and here’s a handy config guide
http://www.rtcw.jolt.co.uk/content/enemy_territory/cmdcvarlist/index.html


(eRRoLfLyNN) #27

/com_maxfps “0” to leave your fps uncapped

Welcome to the wonderful world of ET! :tapir:


(Gringo) #28

Where i prefer to live!!!


(SCDS_reyalP) #29

Note that if your FPS goes too high (somewhere around 333fps, but it depends on your connection) you will get terrible lag.


(Salteh) #30

Very true :frowning:


(Esskie) #31

Hi There,
Damn!, I had almost finished this post when I accidentially closed the browser window & lost the lot :angry: .

Anyway, as I can’t be bothered typing it all out again (and to spare you the task of reading it all) I’m just going to make this one shorter.

Basically , hello everyone & everyone who I’ve never spoke to before :slight_smile: .

ayatollah - I’ve got both etpub & etpro in now so I’ll just need to ‘stock up’ on maps I guess?. I’ve taken note of the ip you posted for the VPN Clan svr & have grabbed most of the maps just so save having to d/l em before starting a game.
Just 2 questions mate:

so if you wanna join the craic go to the server below!
…the craic… is what??. And…
add the tapir to your sig!quote] tapir??? , prolly sumthin simple but bear in mind guys I’ve been ‘out of it for sooo long now’ LoL :weird:

ayatollah - I agree my friend, best to at least give other options a chance (with anything!) to see what they are/it is like?.

Just a couple of points: [quote]so if you wanna join the craic go to the server below! ET FTW!

It’ll more than likely be something I’ve overlooked & is easy or obvious but what’s ‘craic’ m8?

EDIT: Oh and add the tapir to your sig!
, what is the ‘tapir’ you mention?. Again my apolz as it’s prolly something really simple!.

Loffy- No I’m in Scotland mate lol, not being sarcastic in anyway!, but linux is used all over the world not just in Finland lol. I do like it as an OS though, it can be a real pita to setup & configure but once you have it the way you want it, it’s a good, stable OS that can run on most minimal of spec machines. Ideal for running servers whether it be for business or a home LAN?. With the latest releases of Mdk (Mandriva 10.1 & 10.2) theres more automated driver installation procedures so 9 times out of 10 your NVidia card will work ‘out of the box’. In previous releases it was/is a case of unpacking the driver files then you still had to edit a conf file in order to tell it it had a driver for the card, where it is & that it’s allowed to use it!!.
I think as Linux is becoming more popular & being installed on many more home user’s PCs, it’s also becoming easier for anyone migrating from Windoze much easier.

Higgins -

just pm me some time if you feel like having a game, maybe you might like to join up with my clan? Just let me know

I will do my friend, you can ‘show me round the maps’ etc,. Whats the deal with the muting thing on your svr mate?, I kept on being muted for 10secs, the only message that was displayed had most of the letters replaced with asterixes?.
Does <LOL> play any other games?, or is it ET:RtCW only?

Elder N - Cheers for the cfg guide my friend, as it’s based on the Q3 game engine will the following do for recording in-game demos?:
=========================
// Demo recording
set rec “vstr first_rec”
set first_rec “g_synchronousclients 1;wait;record;wait;g_synchronousclients 0;set rec vstr second_rec”
set second_rec “stoprecord; set rec vstr first_rec”
bind p “vstr rec”
=========================
And would the majority of my Q3 binds/scripts work for RtCW as well?, it would make life sooo much simpler if they did!, just things like an online rate changer fo example:

//Client-side rate control
echo “rate settings on F2 and keywords: dslow,vslow,slow,norm,fast,vfast,lfast and rates”
unbind “F2”
//
alias “dslow” “rate 2500;cl_updaterate 10;cl_cmdrate 10;ex_interp 0.100; bind F2 vslow;echo dead slow speed”
alias “vslow” “rate 3500;cl_updaterate 13;cl_cmdrate 13;ex_interp 0.077; bind F2 slow;echo very slow speed”
alias “slow” “rate 5000;cl_updaterate 15;cl_cmdrate 15;ex_interp 0.067; bind F2 norm;echo slow speed”
alias “norm” “rate 7500;cl_updaterate 20;cl_cmdrate 30;ex_interp 0.050; bind F2 fast;echo normal speed”
alias “fast” “rate 9999;cl_updaterate 30;cl_cmdrate 40;ex_interp 0.033; bind F2 vfast;echo fast speed”
alias “vfast” “rate 20000;cl_updaterate 60;cl_cmdrate 60;ex_interp 0.017; bind F2 lfast;echo blazing speed!”
alias “lfast” “rate 20000;cl_updaterate 100;cl_cmdrate 100;ex_interp 0.010;bind F2 dslow;echo LAN blazing speed!”
//
bind “F2” “slow”
alias “rates” “rate;cl_updaterate;cl_cmdrate;ex_interp”
=========================

The reason I wondered about the uncapping of the fps was purely to compare how well/fast the game runs in comparision to others, Q3 for example, for my netplay cfg it is capped.
My connection is 2Mb DSL and I usually ping anywhere between 20-50, my average is in the 30s but that’s not to say a 50 ping is bad to play on by any means!. Who can remember playing Q2DM/CTF with a 280 ping on 56k dial-up? :smiley: .

I’m off to stock up on somemore maps etc for ET.

Regards, Esskie
PS: So much for making this post shorter then huh?!


(Higgins) #32

I think my word blocker has gone mad, Ive added words that will insult people to it, so they are blocked, but I think its blocking letters from those words aswell, ill go fix it right now.


(Esskie) #33

Hi There Higgins :),

It seems to be that way as it was only certain letters in my messages that were replaced.

Btw, what game browser does everone use nowadays?, I installed GSpy, just to get playing asap I suppose but it’s riddled with AdWare!!, every single shortcut or url link etc is being reported as Adware, including the GSpy executable!,
ie; “C:\Program Files\GameSpy Arcade\Aphex.exe” and of course if/when I quaranteen em I have noway of starting GSpy!?.

You ever hear of Eye Game Browser?, I have the install exe on disc but couldn’t even say if it’s still supported or not?.


(Gringo) #34

Esskie, “craic” is an Irish word we use which means to have a bit of fun, a bit of banter!

As for a tapir, this is one----------> :tapir:
And heres a real life one


(Dazzamac) #35

As ET is based on the Q3 engine you’ll find the configs are extremely similar. If you know your way around the quake engine you’ll have no bother with ET.

The craic is an irish term. It can be used in many instances such as ‘Whats the craic?’ (How’s things /How are you) ‘It was good craic’ (It was fun) ‘The craic was ninety’ (It was great fun).

Or if you prefer the technica answer
Wikipedia : Craic, is a pseudo-Gaelic spelling of the English slang term crack, meaning good fun. Most commonly this word is associated with Ireland and its slang.


(Esskie) #36

Tapir now added!! :smiley:


(Esskie) #37

Btw, anyone hear dowmloaded the HL2 demo?, I ask coz I’ve d/l’d it twice in 2 days (all 751Mb of it!!) and, once installed I get past the pic of the dude with the valve sticking outta his eye then a brief glimpse of a colourfull loading screen before the puter restarts.

I know it’s only a demo but it’s not like it’s a pre-release beta or anything. I’m not sure if I like all this Steam shinnanigins!?.


(ElderNewb) #38

@esskie not at my own machine right now but i use one myself i’ll post when i get home (although i think i sourced it online from somewhere - i’ll have a look)

edit: had something similar with HL2, the actual game. where the app would start up and then basically shut down. The there was an update on steam ( i think) a few days later. Try just starting up steam and check for any available updates.

edit 2: demo script
//Demo record on/off toggle
set demoon “autorecord; set nextdemo vstr demooff; echo ^2Recording ^7demo”
set demooff “stoprecord; set nextdemo vstr demoon; echo ^7Recording ^1stopped”
set nextdemo “vstr demoon”
bind x “vstr nextdemo”


(Dazzamac) #39

Similar thing happened me. I stuck another 512mb of ram in and it did the job. Whats you machine spec?


(Esskie) #40

Elder N - Yes it seemed to start it’s messing around when Steam was starting, it would say it was updating or similiar then terminate, unfortunately I can’t remember what I did (if anything?) to get past this.

Thanx for the demo script btw :drink: .

Dazzamac - Another 512Mb!!, there’s 1Gb DDR400 (PC3200) in there already bro!?.
Quick rundown of my spec anyway:
AMD64 3200+
2 x 512Mb DDR400 RAM
GF-6600 256MbDDR2 PCI-Express
Winfast 6100K8MA (Sckt-939) mobo

I use XP Pro for gaming etc.

I only built it from scratch 2wks ago & this is the 1st game/app that’s given me any hassle to date, although I did find out that, despite working perfectly in 3 other PC’s, my crappy BTC-1008IM DVD -/+ R/RW combo drive just doesn’t want to play game at all. However, with so many inexpensive dual-layer/R9/DVD-RAM, etc, available now I plan to go buy a LG-4163B tomorrow.
I like the Samsung TS-H552U but after reading a review I’m not so keen as apparently :

Doesn’t support DVD-ROM booktype for DVD+R/+RW/+R DL formats
CD/DVD writing quality with specific media.
Doesn’t support overburning for DVD±R formats
Cannot play/rip CDS200 AudioCD protection
Cannot backup accurately up to v2.8x SD2 and newest protected titles
Doesn’t support Mount Rainier
Doesn’t support DVD-RAM

Esskie.