My server doesn't show up on the list.

([ToC]Death) #1

I just installed the new patch (2.60). I run my server with the 2.60 patch, then I go into the game on the 2.60 patch. The server doesn’t show up? This applies for all of my clan members. Can someone help me fix this?

(EB) #2

rented server or dedicated on your own network ?
Behind a router ?
Are you execing a server.cfg ?
Is it dedicated to the internet or lan ?
Answer all of the above and you will get better help.

([ToC]Death) #3

Dedicate on own network, and this is what i have in the target:
+set fs_game ShrubET +set dedicated 2 +exec punkbuster.cfg +exec server.cfg +set net_port 27960 +set com_hunkmegs 64 +set com_zonemegs 32 +set fs_homepath 27960 +set sv_punkbuster 1 +exec server.cfg. I am behind a router (D-Link, DI-604). does any of this information help?

(Depth_Charge) #4

Did you make sure you properly forwarded the ports?

(SCDS_reyalP) #5

Is the server behind the router, and is the router doing NAT (aka internet sharing) ?

([ToC]Death) #6

I think I have it set up right. I have the D-Link - DI-604. Can you tell what exactly I have to do to set it up right?

([ToC]Death) #7

How do I make my router do NAT?

(Depth_Charge) #8

D-Link Tech Support’s Instructions

Make sure the private and public say 27960
And I think you need TCP and UDP

Edit: Not both just UDP thanks reyalP

(SCDS_reyalP) #9

You only need UDP.

I have a feeling the master will never list a server that thinks it is in a private IP range, but I could be wrong about that. In any case if you have forwarding set up, you can tell your clanmates to connect to your public ip. In general, running a real public server on a home connection isn’t a good idea.

([ToC]Death) #10

What do I put for my private IP? and is protocol type UDP or TCP. both private port and public ports are the same? and do i enable virtual server, or not. do i need to set anything else up for my port to be forwarded so that my server shows up on the list?