script mover

(Zipp3R|PL) #1

when i am making ski lift and want to make 8 trams so i must hav lot of sripting? or 1 script for all?

(Mean Mr. Mustard) #2

You’ll always just have one script file :smiley:

I suggest making 8 tram script_movers. You will then have to script routines for all 8 trams However, the scripting will be nearly identical. The onlly difference will be the gotomarker or the followspline commands.

So, create the one tram and the path you want it to follow. Then get the scripting working for that. Once completed, you can go back and add the other trams (copy,paste,rename) and then copy/paste/edit the scripting.

(grizzlybear) #3

ive just booked to go to jasper at the end of march :slight_smile:

so the idea of a ski lift gave me the bug

here is a rough lashup http://www.zen20443.zen.co.uk/zips/ski_lift_grizz.zip
.map +.script

there are 13 poles (ski_lift_3 is out of position in map and wont run right)

2 path_corner2’s

then just use faceangles to rotate at the bottom :wink:

but…

because i compiled them in position they go screwwy on the bottom wheel
(some start goin up and some start goin down) this messes up the loop

if you have space set them all at the relevent distance from eachother at the bottom of the lift rope (in a hut/outta the way so they cant be seen)
then they will all follow the same script/path an should loop perfectly :wink: once they all get to possition on the lift rope :wink:

hope it helps to point u in the right direction

ski chairs (just put a plank on the bottom :wink:

often thought about doing a moving floor map so you can fight while skiing/slipping down a hill mmmmmmm…one day :wink:

(Zipp3R|PL) #4

thanks grizz ! yu are great :smiley: when i compone in map and make it longer i will post here script becouse i will hev problems as i know world :smiley: