multiple problems

(diaper eater) #1

ok, so a few problems have built up in my map now

  1. i made my tracemap, but i dont know where to go from here, and if i can just leave it where it is until i make a pk3, then why wont my rain work, could someone guide me thru rain n such, i followed the level designers ref, but didnt help much

  2. the origin lines of my constructable wont go away, they are only visible in when looking at the sky and its in your fov, and also, if i test my map alone, whether its the pk3 or just the bsp in the etmain/maps folder, whenever i play alone not in an internet server i make, then i can see the construction boxes, but as soon as i put the pk3 on my server the constructable boxes are invisible

  3. i have a completely enclosed room, that is pitch black, and in it i have the following: a model of a light, a light entity with fade of .30 and light of 50, and under that is another light with a fade of 3 and a light of 70, and also have a target_speaker playing the noise sound/world/lightf_hum.wav. the problem is that the light wont light up the dark room, and the noise doesnt play

(diaper eater) #2

bump

need help

(lennyballa) #3
  1. My tracemap is in /etmain and is called mymap_tracemap.tga
    2.dunno check other treaths
  2. Maybe if you use a sky and some ambient
    key: ambient
    value: 15
    then select it (after you pressed “n”) and you should be able to select a color. Now you have some “auto” lightning, tough it will be dark in some places. delete all your lights and just press right mouse button and select light. Just leave the value 300 and press esc. This is the easiest way :slight_smile:

lenny :banana: