[Ghostclip] Kira (like Arty) designators invisible at close range


(bespeak) #1

Since I’ve exceeded the edit window: This post supersedes Kira’s version of Arty’s designator (vertical laser beam) is invisible, which was incorrect (it’s not really invisible).

Synopsis:

  • [Ghostclip] Kira (like Arty) designators invisible at close range

Today’s version:

Description:

  • Since Ghostclip, the vertical beam present when aiming Kira’s laser is no longer bright and visible at all distances.

  • Kira targeting beam (press Q: stays in place, hold Q: follows crosshair)

  • It’s invisible at close range.

  • It starts to appear (fades in) at around 384 world units, but it’s so faint, it might not be noticeable.

  • At FOV 100, it usually invisible and can’t be seen at all at a distance. It just might be seen towards the last seconds of the orbital laser’s lifespan, when it gets brighter.

  • At FOV 65, it’s sometimes visible at a distance. It may be very faint.

  • It’s definitely visible when viewed at a distance through a sniper scope.

  • It’s possible that Javelin’s guided rocket laser was accidentally applied to every other user (including [but not limited to] Arty, Kira, their laser painters, and Skyhammer).

Testcase on any server:

  • Underground #1 attackers:
  • From the bottom of the escalators,
  • Start a laser at the departures timetables at the defenders side
  • Either:
    • Immediately look down at your feet and press Q
    • Walk backwards until the vertical beam is visible
  • Or:
    • Turn around and hold Q
    • While holding Q, aim closer or further away from yourself until the vertical beam is visible

The old bug report was:

Synopsis

  • Kira’s visual indicator laser (like Arty markers) is missing [regression, 20170921 Ghostclip]

Related bugs

Type

  • Defect, visual, regression

Version

Severity

  • Low

  • Visual

  • Low-medium

  • Indirectly affects gameplay: Loss of visual cue

  • Regression

Can be reproduced offline (SwitchLevel)

  • Yes

Environment

  • Minimal/low settings
  • Read-write or deleted .ini or .ue3profile
  • TexturePoolSize 1 or default

Description

  • The Ghostclip update changed the appearance of Kira’s laser targeting.

    When moving an active pillar of fire, the desired location should have a flat square+circle-cross appearing just above the ground, and a small vertical laser beam similar to an impending Arty strike.

    The vertical laser beam is now missing.

  • Steps to reproduce:

  • As Kira, activate a satellite laser

  • Press Q or equip to move the laser somewhere else

  • Expected results:

  • Green/red cylinder

  • Light blue square+circle-cross

  • Light blue vertical laser beam

  • Actual results:

  • The vertical laser beam is gone.

  • Green/red cylinder

  • Light blue square+circle-cross

Reproduction rate:

  • 10/10

Note:

  • This change may not be specific to these mercs only and may affect others (i.e. restoring Skyhammer and Arty’s effects, but forgetting about Kira, Bushwhacker, and Proxy):
  • No other abilities or effects or other parts of the game were tested
  • I don’t know what other assets use this rope sprite laser